Cruise rubber stand made from natural rubber blended with NR/EPDM blended compound rubber, is a load supporter especially designed for Air condensing unit. This stand possesses both high compressive strength and good weathering resistance.
Rubber stand can load of up to 80 kgs per piece. Easy to install with Stainless steel bolt & nut prefixed. Very effective in reducing vibration and noise level. Reduced vibration helps prolong service life of the air condensing unit.
|Rubber Load Supporter For Air Condensing Unit|
|MODEL NAME||CR STD RUB 04|
|Material||NR/EPDM blended compound rubber|
|Tensile Strength||Minimum 7.0 Mpa|
|Hardness||75 ±5 Shore A|
|Compression strength AT 10% Deflection||Minimum 0.80 N/mm ²|
|Maximum compression strength||Minimum 6.0 N/mm ²|
|Tear strength||Minimum 16 kgf/cm|
|Packing||4nos ( 1 Set/ Box)|
|Carton Size (H x W x D)||10.2 x 21.5 x 12.4|
|*All Specifications are approximate and are subject to change without any prior notice.|